Link ECU

Part Number: 101-0295The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged...

Part Number: 101-00085 m long 'A' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has...

Part Number: 101-00095 m long 'B' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has...

Part Number: 101-0080Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Technical Specs and Wiring Up to 150 PSI above at...

Part Number: 101-00105 m, to suit obsolete G4 Atom and Lightning only. Does NOT fit G4+ Atom

Part Number: 101-0188E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiomete...

Part Number: 101-00052.5 m long 'A' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom h...

Part Number: 101-00062.5 m long 'B' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom h...

Part Number: 101-0044This three channel igniter is suitable for electronic ignition applications. Required when using coils that don't have inbuil...

Part Number: 101-0016Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost contr...

Part Number: 101-0116This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fur...

Part Number: 101-0165The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applic...

Part Number: 101-0025Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with al...

Part Number: 101-0146Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Inclu...

Part Number: 101-0320Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitab...

Part Number: 400-0100Requires modification to be done by Global HQ at time of order (allow approx 2 weeks in addition to standard lead time). E-Thr...

Part Number: 101-0164This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged application...

Part Number: 101-0015More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to...

Part Number: 101-0163 The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged a...

Part Number: 101-0162 The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated...

Part Number: 101-0186High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mat...

Part Number: 101-0054Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knockl...

Part Number: 101-0014For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you ...

Part Number: 101-0229Crimping Tool for terminals to suit AMP Superseal connectors. To suit terminals used in A, B, C and D loom connectors.