Skip to content
⚠️ We’re two team members down on the phone lines & emails — We have closed our phone line to help, Thanks for your patience! 💙
⚠️ We’re two team members down on the phone lines & emails — We have closed our phone line to help, Thanks for your patience! 💙
Whiteline 18 x 20 x 10 cm / Front and rear vehicle kit Front and Rear Sway Bar Link to Suit Subaru Forester, Impreza, Liberty and Outback Autofit

Front and Rear Sway Bar Link to Suit Subaru Forester, Impreza, Liberty and Outback

SKU WHL-KLC31
by Whiteline
$532.43 +GST - $532.43 +GST
$532.43 +GST
$532.43 +GST
$532.43 +GST - $532.43 +GST
$532.43 +GST
$612.2945 Including GST (NZ Customers only)
Availability:
In stock

Front and Rear Sway Bar Link to Suit Subaru Forester, Impreza, Liberty and Outback

Details:

Product Note: KLC26 and KLC30

Foot Note 1: Front and rear vehicle kit

Foot Note 3: 3 Year / 60,000Kms

Sub Brand: Performance

Components Per: 4 Links, 8 Bolts, 16 Washers, 8 Nuts

Fitting Position: Front and Rear

Wheel Alignment: Yes

Installation Difficulty: Easy if you have specialist tools and know what your doing.

Installation time: 1 Hour

Kit Contents: 4 Links, 8 Bolts, 16 Washers, 8 Nuts

Descriptions:


Kit Contains:
  • Front Sway Bar Link
  • Rear Sway Bar Link
High tensile extruded alloy link fitted with ultra low compliance synthetic elastomer bushings.



Benefit Note:

The kit utilises a high tensile extruded alloy link fitted with ultra low compliance synthetic elastomer bushings. Critical hardware is replaced with high tensile components to match the higher loads. The result is much more precise and direct roll control with up to 25% more effective bar rate available at lower wheel deflection points. This does NOT mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Link shape and bush mounts are designed to allow maximum sway bar articulation to ensure full suspension travel while acting more directly under vertical load. Standard length maintains correct sway bar operation. The kit utilises a high tensile extruded alloy link fitted with ultra low compliance synthetic elastomer bushings. Critical hardware is replaced with high tensile components to match the higher loads. The result is much more precise and direct roll control with up to 25% more effective bar rate available at lower wheel deflection points. This does NOT mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Link shape and bush mounts are designed to allow maximum sway bar articulation to ensure full suspension travel while acting more directly under vertical load. Standard length maintains correct sway bar operation. *All prices shown on the Whiteline website include GST. You will not be charged any additional fees related to tax.
    Vehicle Types;
    • Make/Model: SUBARU FORESTER, Chassis Group: 1997-2002 | FORESTER SF, Important Note: Front and rear vehicle kit
    • Make/Model: SUBARU IMPREZA, Chassis Group: 1992-2000 | IMPREZA GC, GF, Important Note: Front and rear vehicle kit - suits models with steel arm
    • Make/Model: SUBARU IMPREZA, Chassis Group: 1992-2000 | IMPREZA WRX GC, GF, Important Note: Front and rear vehicle kit - suits models with steel arm
    • Make/Model: SUBARU IMPREZA, Chassis Group: 2000-2007 | IMPREZA GG WAGON, Important Note: Front and rear vehicle kit
    • Make/Model: SUBARU IMPREZA, Chassis Group: 2000-2008 | IMPREZA WRX GG WAGON, Important Note: Front and rear vehicle kit
    • Make/Model: SUBARU LIBERTY, Chassis Group: 1989-1994 | LIBERTY BC, BF, Important Note: Front and rear vehicle kit - suits models 10/1992 - on
    • Make/Model: SUBARU LIBERTY, Chassis Group: 1994-1999 | LIBERTY BD, BG, Important Note: Front and rear vehicle kit
    • Make/Model: SUBARU OUTBACK, Chassis Group: 1996-1998 | OUTBACK BG, Important Note: Front and rear vehicle kit