COMP Cams

Low Tension Valve Checking Springs3" Free Length, .725" I.D, .850" O.D (Pair)CO4758-24758-2Low tension checking springs can be installed by hand in...

Valve Stem Oil Seals, Positive Stop Tefflon 503-16 CO503-16 Suit 11/32" Valve, .530" Guide, .630" O.D VALVE STEM OIL SEALS, 11/32" Comp Cams offers...

Valve Stem Oil Seals, Metal Body Viton Seal 517-16 CO517-16 Suit 11/32" Valve, .500" Guide, .545" O.D, For Use With Tripple Valve Springs VALVE STE...

Valve Stem Oil Seals, Metal Body Viton Seal 518-16 CO518-16 Suit 11/32" Valve, .530" Guide, .575" O.D, For Use With Tripple Valve Springs VALVE STE...

Guide Plate Set (Flat) 5/16" Pushrod 4816-8 CO4816-8 Suit Ford 289-351W GUIDE PLATES, SBF, FLAT Designed using stereo lithography techniques for ac...

High Energy Hydraulic Camshaft 268H suit Holden 253-308 1970-88218°/ 218° Duration @ .050", .470"/.470" Valve Lift, 110° L/CCO82-210-482-210-4Durat...

High Energy Pushrod - 8.550" Length (Short) 7843-1 CO7843-1 Suit BB Ford 429-460 5/16", .080" Wall Thickness, H-H End Type (Each) HIGH ENERGY 5/16"...

7° Machined Valve Locks Single Groove11/32" Valve Stem SizeCO648-16648-16COMP cams machined 7° race locks are recommended for race and performance ...

Hardened Lash Cap Set.190" Head Diam., .080" Thick, 3/8" Valve StemCO622-16622-16Ultimate in strength and reliability Fit valve stem well and are e...

Hardened Lash Cap Set.230" Head Diam., .080" Thick, 5/16" Valve StemCO620-16620-16Ultimate in strength and reliability Fit valve stem well and are ...

Harden Steel Valve Locks, Single Groove7° Lock Angle, 11/32 Valve Stem SizeCO601-16601-16COMP cams machined 7° race locks are recommended for race ...

Calibrated Test SpringCO53165316These bench top testers are really the only sure way to check valve spring pressure. This model will handle springs...

Aluminium Vacuum Canister (Black)CO52005200A vacuum reserve canister captures an extra shot of vacuum from your engine for your power brakes. The C...

Valve Stem Oil Seals, Metal Body Viton Seal 515-16 CO515-16 Suit 3/8" Valve, .530" Valve Guide diameter VALVE STEM OIL SEALS, 3/8" COMP Cams offers...

Block Deck Plate - StyleHeads Off (Universal)CO49334933Positively stops pistons in order to find Top Dead Centre (TDC) Bolt - style screws into spa...

Crankshaft Socket GM Gen III/IV LS - TypeCO49144914Specially designed 1/2" drive socket allows rotation of engine assembly Knurled retaining nut th...

7/16" Stud Girdle Adjusting NutWith Snap Ring to Hold Girdle BarCO4508S-14508S-1Stud girdle polylocks are precision ground for minimum run out Tape...

Engine Finishing KitSuit Small Block ChevyCO233233It's easy to overlook the small details. For engine builders focused on the larger components lik...

Xtreme Energy Hydraulic Camshaft - XE268HSuit Small Block Chevy 1955 - 98CO12-242-212-242-2RPM operating range 1600 - 5800 Duration advertised Inle...

Dual Valve Spring Set 1.620" O.DInstalled: 230 @ 1.950", Open: 710 @ 1.200", Rate: 640 lbs., Coil Bind: 1.100"CO951-16951-16COMP Cams offers a wide...

Triple Valve Spring Set 1.645" O.DInstalled: 332 @ 2.100", Open: 949 @ 1.200", Rate: 686 lbs., Coil Bind: 1.130"CO948-16948-16COMP Cams offers a wi...

High Energy Hydraulic Camshaft suit Holden 253-308 1970-88227°/ 241° Duration @ .050", .526"/.511" Valve Lift, 107° L/C, 2000-5800 RPMCO82-600-482-...

High Energy Pushrod - 8.412" Length (Short) 7832-1 CO7832-1 Suit Ford 351 Cleveland 5/16", .080" Wall Thickness, H-H End Type (Each) HIGH ENERGY 5/...

Spring ID Locator .060" Locator ThicknessLocator O.D 1.510", I.D .570", Spring I.D .970" Suit #26120 Beehive SpringsCO4696-164696-16COMP Cams Sprin...