LINK ECU 13%

Part Number: 101-019474mm Electronic Throttle Body 74mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on in...

Part Number: 101-019154mm Electronic Throttle Body 54mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on in...

Part Number: 101-0011For use with Low-Impedence Injectors. Includes a single 1 Ohm 50W resistor mounted to a heatsink. Please contact us to ensure ...

Part Number: 101-0012For use with Low-Impedence Injectors. Includes set of 2 x 1 Ohm 50w resistors mounted to a heatsink. These are also sold in a ...

Part Number: 101-0014For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you ...

Part Number: 101-0013For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you ...

Part Number: 101-0287Bosch Junior Timer / Jetronic (Male) to USCar (Female) Adapter Commonly used when upgrading to fuel injectors with the newer U...

Part Number: 101-0288Injector Adapter - USCar (Male) to Bosch Junior Timer/Jetronic (Female) Fits Bosch Junior Timer/EV1/Jetronic injector and conn...

Part Number: 101-0289USCar Fuel Injector Connector Kit Includes: Housing Crimp terminals Terminal seals Seal locating tab Locking tab

Part Number: 101-00524 x EV14 1000cc fuel injectors in their unmodified form as they come from Bosch. Injectors are tested and graded into flow mat...

Part Number: 101-00105 m, to suit obsolete G4 Atom and Lightning only. Does NOT fit G4+ Atom

Part Number: 101-0195

Part Number: 101-0033Dual core screen cable for use with trigger signals and knock sensors - 10m per pack

Part Number: 101-00020.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’...

Part Number: 101-00085 m long 'A' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has...

Part Number: 101-0165The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applic...

Part Number: 101-0298The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged...

Part Number: 101-0162 The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated...

Part Number: 101-0100Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are ...

Part Number: 101-0280Hall effect sensor designed for use in applications where ferrous edge detection/near zero speed sensing is needed. They provi...

Part Number: 101-0146Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Inclu...

Part Number: 101-0025Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with al...

Part Number: 101-0186High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mat...

Part Number: 101-0047Weld in steel boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-...