Link ECU

Part Number: 101-0054Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knockl...

Part Number: 101-0229Crimping Tool for terminals to suit AMP Superseal connectors. To suit terminals used in A, B, C and D loom connectors.

Part Number: 101-0053Donut style 8mm hole Includes plug and pin kit

Part Number: 101-0011For use with Low-Impedence Injectors. Includes a single 1 Ohm 50W resistor mounted to a heatsink. Please contact us to ensure ...

Part Number: 101-00020.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’...

Part Number: 101-00030.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’...

Part Number: 101-0280Hall effect sensor designed for use in applications where ferrous edge detection/near zero speed sensing is needed. They provi...

Part Number: 101-0101Large Diameter Trigger wheel – Small and Medium sizes also available. 60-2 tooth 200mm diameter 40mm centre

Part Number: 101-0102Medium Diameter Trigger wheel – Small and Large sizes also available. 24 tooth 175 diameter 40mm centre

Part Number: 101-0103Small Diameter Trigger wheel – Medium and Large sizes also available. 24 tooth 150mm diameter 40mm centre

Part Number: 101-0045Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Part Number: 101-0306 Intended for use with our terminated LS engine harness. Plug and play compatibility with Gen 4 Knock Sensors in factory locat...

Part Number: 101-0048Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA &...

Part Number: 101-0023Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). ...

Part Number: 101-0077Includes Plug Kit - 2 way Bosch Style plug, terminals and boot M12 Thread

Part Number: 101-0076Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Part Number: 101-0304• Intended for use with our terminated LS engine harness. Plug and play compatibility for Gen 4 LS DBW throttle bodies. • ...

Part Number: 101-0001Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatib...

Part Number: 101-0121Terminals - 100 pack. Suits A, B, C and D G4, G4+ and G4X ECU connectors.

Part Number: 101-0095G3 LinkPlus models. 74 way housing

Part Number: 101-0033Dual core screen cable for use with trigger signals and knock sensors - 10m per pack

Part Number: 101-0211Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6Pin round CAN connector on the front of t...

Part Number: 101-0106Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion conne...

Part Number: 101-0212CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices....