COMP Cams HRT Stage 2 Camshafts CK201-303-17
SPECIAL ORDER ITEM
This is a special order item. When you complete your order, we will order it from the supplier.
FREIGHT INFORMATION
Pricing does not include additional freight charge.
Request a quote below.
Manufacturer's Part Number: CK201-303-17
Part Type: Camshaft Kits
Product Line: COMP Cams HRT Stage 2 Camshafts
Automotive Fittings Part Number: CCA-CK201-303-17
UPC: 036584405306
Cam Style: Hydraulic roller, OE roller
Basic Operating RPM Range: 1,900-7,000
Camshaft Use: Street/Strip
Camshaft Manufacturers Description: Best average torque and power of any sub .600 in. lift Gen IV HEMI cam tested. Runs great from 2500-6500 RPM.
Intake Duration at 050 inch Lift: 220
Exhaust Duration at 050 inch Lift: 230
Duration at 050 inch Lift: 220 int./230 exh.
Advertised Intake Duration: 273
Advertised Exhaust Duration: 279
Advertised Duration: 273 int./279 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.596 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.582 in.
Valve Lift with Factory Rocker Arm Ratio: 0.596 int./0.582 exh.
Lobe Separation (degrees): 114
Grind Number: LST273HR14
Computer-Controlled Compatible: Yes
Lifters Included: No
Valve Springs Included: Yes
Valve Spring Style: Beehive
Outside Diameter of Outer Spring (in.): 1.310 in.
Retainers Included: Yes
Locks Included: Yes
Valve Stem Seals Included: Yes
Timing Chain and Gears Included: No
Assembly Lubricant Included: No
Pushrods Included: Yes
Intake Overall Length (in.): 6.800 in.
Exhaust Overall Length (in.): 8.100 in.
Rocker Arms Included: No
Gaskets Included: No
Valve Springs Required: No
Quantity: Sold as a kit.
Notes: Fits engines with VVT. Requires the use of phaser limiter CCA-5761 or phaser lock kit CCA-5760. Custom tuning is required. The MDS system must be disabled and must be used with non MDS lifters.
Description:
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.
What does "Will be special ordered for you" mean?
This means that we do not have the product in our warehouse. We only order “Special Order” products from the supplier when you order them from us. Generally, we do not intend to keep an inventory of these items. Therefore, returns are not possible.
“Special Order” products could be shipped directly from the supplier or they could be shipped to us first. Then, we would ship it to you. The available shipping options will be provided during the checkout process.