Front Control Arm Lower - Inner Rear Bushing Double Offset Kit to Suit Mitsubishi Lancer and Proton Satria

Front Control Arm Lower - Inner Rear Bushing Double Offset Kit to Suit Mitsubishi Lancer and Proton Satria

Details:

Foot Note 2: Adds +0.5deg caster + anti-lift

Foot Note 3: 3 Year / 60,000Kms

Sub Brand: Performance

Components Per: 2 Bushings

Fitting Position: Rear

Wheel Alignment: Yes

Installation Difficulty: Suspension Specialist recommended. Use our Click & Fit service.

Installation time: 2.5 Hours

Kit Contents: 2 Bushings

Descriptions:

Benefit Note:

Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response - forcing more consistent alignment angles through the corner due to the reduced bush compliance. Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. By increasing static caster and improving front end geometry the new alloy mounts coupled with low compliance synthetic elastomer bushings serve to dramatically sharpen initial turn-in response and reduce understeer. *All prices shown on the Whiteline website include GST. You will not be charged any additional fees related to tax.

Vehicle Types;

• Make/Model: HYUNDAI LANTRA, Chassis Group: 1990-1995 | LANTRA J1, Important Note: Performance Alignment - suits 1.6L models - adds +0.5deg caster + anti-lift
• Make/Model: MITSUBISHI FTO, Chassis Group: 1994-2001 | FTO DE, Important Note: Performance Alignment - square bushing design - adds +0.5deg caster + anti-lift
• Make/Model: MITSUBISHI LANCER, Chassis Group: 1988-1992 | LANCER CA, CB, Important Note: Performance Alignment - adds +0.5deg caster + anti-lift
• Make/Model: MITSUBISHI LANCER, Chassis Group: 1992-1996 | LANCER CC SEDAN AND COUPE, Important Note: Performance Alignment - adds +0.5deg caster + anti-lift
• Make/Model: MITSUBISHI LANCER, Chassis Group: 1992-1996 | LANCER CC WAGON AND HATCH, Important Note: Performance Alignment - adds +0.5deg caster + anti-lift
• Make/Model: MITSUBISHI LANCER, Chassis Group: 1995-2004 | LANCER CE SEDAN, COUPE AND HATCH, Important Note: Performance Alignment - adds +0.5deg caster + anti-lift
• Make/Model: MITSUBISHI LANCER, Chassis Group: 1996-2003 | LANCER CE WAGON, Important Note: Performance Alignment - adds +0.5deg caster + anti-lift
• Make/Model: MITSUBISHI LANCER, Chassis Group: 2002-2008 | LANCER CG, CH, CS, Important Note: Performance Alignment - square bushing design - adds +0.5deg caster + anti-lift
• Make/Model: MITSUBISHI MIRAGE, Chassis Group: 1991-1995 | MIRAGE CC, Important Note: Performance Alignment - adds +0.5deg caster + anti-lift
• Make/Model: MITSUBISHI MIRAGE, Chassis Group: 1995-2004 | MIRAGE CE, Important Note: Performance Alignment - adds +0.5deg caster + anti-lift
• Make/Model: PROTON IMPIAN - WAJA, Chassis Group: 2001-2005 | IMPIAN-WAJA CF, Important Note: Performance Alignment - adds +0.5deg caster + anti-lift
• Make/Model: PROTON JUMBUCK, Chassis Group: 2002-2008 | JUMBUCK C97, Important Note: Performance Alignment - adds +0.5deg caster + anti-lift
• Make/Model: PROTON M21, Chassis Group: 1995-2000 | M21 C99, Important Note: Performance Alignment - adds +0.5deg caster + anti-lift
• Make/Model: PROTON PERSONA, Chassis Group: 1994-2008 | PERSONA C9_S, C9_M, Important Note: Performance Alignment - adds +0.5deg caster + anti-lift
• Make/Model: PROTON SATRIA, Chassis Group: 1997-2006 | SATRIA C9_M, Important Note: Performance Alignment - adds +0.5deg caster + anti-lift
• Make/Model: PROTON WIRA, Chassis Group: 1995-2007 | WIRA C97, C98, Important Note: Performance Alignment - adds +0.5deg caster + anti-lift