Rear Control Arm Lower Rear - Outer Bushing Kit Double Offset to Suit Holden Commodore VE, VF and HSV

Rear Control Arm Lower Rear - Outer Bushing Kit Double Offset to Suit Holden Commodore VE, VF and HSV

Details:

Foot Note 2: Adds +/-1.5deg camber

Foot Note 3: Limited Lifetime Warranty

Sub Brand: Replacement

Components Per: 8 Bushings, 4 Tubes

Fitting Position: outer

Wheel Alignment: Yes

Installation Difficulty: Tricky installation may take longer then you think if you are not experienced, we reccomend you use our click & fit service.

Installation time: 3 Hours

Kit Contents: 8 Bushings, 4 Tubes

Descriptions:

Benefit Note:

Providing +/- 1.5deg camber adjustment (on car), Whiteline's kit is the economical solution for correcting alignment and prolonging tyre life especially on vehicles which are lowered, load carrying and/ or running expensive low profile tyres. Providing +/- 1.5deg camber adjustment (on car), WHITELINE'S kit is the economical solution for correcting alignment and prolonging tyre life especially on vehicles which are lowered, load carrying and/ or running expensive low profile tyres. *All prices shown on the Whiteline website include GST. You will not be charged any additional fees related to tax.

Vehicle Types;

• Make/Model: CHEVROLET CAMARO, Chassis Group: 2009-2015 | CAMARO 5TH GEN, Important Note: Performance Alignment - adds +/- 1.5deg camber - replaces both control arm outer and trailing arm rear bushing
• Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE INTERCEPTOR RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VC RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VH RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VK RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VL RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HOLDEN CALAIS, Chassis Group: 2006-2013 | CALAIS VE, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HOLDEN CAPRICE, Chassis Group: 2006-2013 | CAPRICE WM, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HOLDEN COMMODORE, Chassis Group: 2006-2013 | COMMODORE VE, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HOLDEN STATESMAN, Chassis Group: 2006-2010 | STATESMAN WM, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HSV CLUBSPORT, Chassis Group: 2006-2013 | CLUBSPORT E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HSV GRANGE, Chassis Group: 2007-2013 | GRANGE WM, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HSV GTS, Chassis Group: 2006-2013 | GTS E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HSV MALOO, Chassis Group: 2007-2013 | MALOO E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HSV SENATOR, Chassis Group: 2006-2013 | SENATOR E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: HSV W427, Chassis Group: 2008-2013 | W427 E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
• Make/Model: VAUXHALL VXR8, Chassis Group: 2007-2013 | VXR8 E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts