Skip to content
⚠️ We’re two team members down on the phone lines & emails — We have closed our phone line to help, Thanks for your patience! 💙
⚠️ We’re two team members down on the phone lines & emails — We have closed our phone line to help, Thanks for your patience! 💙
Whiteline 30 x 20 x 10 cm Rear Subframe - Bushing Kit to Suit Subaru Forester, Impreza WRX/STi, Levorg, Liberty and Outback Autofit

Rear Subframe - Bushing Kit to Suit Subaru Forester, Impreza WRX/STi, Levorg, Liberty and Outback

SKU WHL-KDT937
by Whiteline
$290.23 +GST - $290.23 +GST
$290.23 +GST
$290.23 +GST
$290.23 +GST - $290.23 +GST
$290.23 +GST
$333.7645 Including GST (NZ Customers only)
Availability:
In stock

Rear Subframe - Bushing Kit to Suit Subaru Forester, Impreza WRX/STi, Levorg, Liberty and Outback

Details:

Foot Note 1: Positive traction kit

Foot Note 3: 3 Year / 60,000Kms

Sub Brand: Performance

Components Per: 8 Bushings, 4 Tubes

Fitting Position: Rear Axle

Wheel Alignment: Yes

Installation Difficulty: Tricky installation may take longer then you think if you are not experienced, we reccomend you use our click & fit service.

Installation time: 2 Hours

Kit Contents: 8 Bushings, 4 Tubes

Descriptions:


Benefit Note:

Subaru's rear subframe is mounted on rubber voided bushings which allows for a significant amount of compliance/movement in the frame during high cornering loads. Whiteline's low compliance polymer bushings eliminate this condition by positively locking in the frame position and removing the 'lateral walking' found when using high grip tires. The polymer bushing design has soft 'stand-off' buffers on the top and bottom surfaces of the bushing to allow slight vertical bushing movement of the subframe to eliminate that 'rock-solid' NVH feel and cushion against minor bumps and allow solid positive location when high torque and power is applied. Subaru's rear subframe is mounted on rubber voided bushings which allows for a significant amount of compliance/movement in the frame during high cornering loads. Whiteline's low compliance polymer bushings eliminate this condition by positively locking in the frame position and removing the 'lateral walking' found when using high grip tires. The polymer bushing design has soft 'stand-off' buffers on the top and bottom surfaces of the bushing to allow slight vertical bushing movement of the subframe to eliminate that 'rock-solid' NVH feel and cushion against minor bumps and allow solid positive location when high torque and power is applied. *All prices shown on the Whiteline website include GST. You will not be charged any additional fees related to tax.
    Vehicle Types;
    • Make/Model: SUBARU FORESTER, Chassis Group: 2012-2018 | FORESTER SJ
    • Make/Model: SUBARU LEVORG, Chassis Group: 2014-2020 | LEVORG VM
    • Make/Model: SUBARU LIBERTY, Chassis Group: 2015-2020 | LIBERTY BN, BS
    • Make/Model: SUBARU OUTBACK, Chassis Group: 2014-2020 | OUTBACK BS
    • Make/Model: SUBARU WRX, Chassis Group: 2014-2021 | WRX STI VA
    • Make/Model: SUBARU WRX, Chassis Group: 2014-2021 | WRX VA
    • Make/Model: SUBARU WRX, Chassis Group: 2022-ON | WRX VB, VN